合金锯片的使用要求是什么？What is the use requirement of alloy saw blade?

1、 工作时，工件应确保被固定，型材定位符合吃刀方向，以免造成异常切入，不要施加侧压力或曲线切割，进刀要平稳，避免刀刃冲击性接触工件，从而导致锯片破损、或工件飞出，发生意外事故。

2、 工作时，发现声音和振动异常、切割面粗糙、或产生异味时，必须立即终止作业，及时检查，排除故障以免发生意外事故。

3、 在开始切削及停止切削时，不要进刀太快，避免造成断齿及破损。

4、 如果切割铝合金或其他金属，要使用专用的冷却润滑液，以防锯片过热，产生糊齿，和其他损坏，影响切割质量。

5、 设备排屑槽和吸渣装置确保畅通，以防积渣成块，影响生产和安全。

6、 干切时，请不要长时间连续切割，以免影响锯片的使用寿命和切割效果；湿片切割，应加水切割，谨防漏电。

1. the work, the workpiece should ensurethat are fixed, profile positioning conforms to the turning direction, so asnot to cause abnormal, not to the lateral pressure and curvilinear cutting,feed to smooth, avoiding the blade impact contact artifacts, resulting inbroken saw blade, or artifacts, there was an accident.

2. When working, when the sound andvibration are abnormal, the cutting surface is rough, or the odor is produced,the operation must be stopped immediately, timely check and troubleshooting toavoid accidents.

3. When cutting and stopping the cutting,do not feed too fast, so as not to cause broken teeth and damage.

4. If the aluminum alloy or other metal iscut, special cooling lubricant should be used to prevent the blade fromoverheating, resulting in paste tooth and other damage, which will affect thecutting quality.

5. The equipment discharging groove andslag suction device ensure the smooth flow, so as to prevent the slag fromforming into blocks, which will affect the production and safety.

6. When dry cutting, please do not cutcontinuously for long time, so as not to affect the service life and cuttingeffect of the saw blade; Wet slice cutting, should add water cut, beware ofleakage.